What Is Memory Card? How To Fix Corrupted Memory Card In 9 Ways?

A memory card or memory cartridge is an electronic data storage device used to store digital information, usually using flash memory. This is commonly used in portable electronic devices, such as digital cameras, cell phones, laptops, tablets, PDAs, portable media players, video game consoles, synthesizers, electronic keyboards, and digital pianos, and allows you to add memory to such devices without interruption. ergonomic. , as the card is usually contained inside the device rather than coming out as USB flash drives.

Table of Contents

Method 1: Insert Corrupted SD Card On Another Device

The first way to repair a damaged SD card is simpler. It is part of the call and test method and can resolve issues caused by device malfunctions or file system errors. All you have to do is remove your SD card and insert it into any other device. This device can be a camera, cell phone, laptop, or anything else. If it works on another device, it means that the SD card may not be compatible with your phone.

You must back up the files to a PC or laptop (if possible) before proceeding. . This should repair the damaged SD card in most cases but if not, try other steps.

Method 2: Format Corrupted SD Card

If method 1 does not fix your problems, try this. You can format the SD card if your phone can read it, and this is known to fix many problems. Note that formatting the SD card means that ALL DATA IN IT IS LOST. So, make sure you already have a backup copy of the files available on the card, otherwise, make a backup copy on another device.

Method 3: Use the SD card repair solution

The Google Play Store contains many applications, as well as the Internet for PCs, which allow SD card configuration. You can check any reliable options to try repairing your SD card if nothing works. You can also use the Windows command line by borrowing a friend’s PC for a few minutes as using a PC is the most popular way to repair SD cards.

Method 4. Repair Damaged SD Card By Error Checking

Applicable to: Repairing SD card is not open or problem is inaccessible due to device error.

Another effective way to fix a faulty SD card error is to use Windows Error Checking. Follow the steps below to repair the damaged SD card yourself:

Step 1. Try connecting the SD card to your PC.

Step 2. Press Windows + E to open Windows Explorer.

Step 3. Right-click on the SD card and open Properties.

Step 4. Go to the Tools tab, then click the Check button.

Check and repair damaged sd card

Allow the scanning process to complete and close the scan window when finished.

Method 5. Launch Windows Troubleshooter

Applies to: Fix hardware-related problems and drivers on SD memory card.

Windows Troubleshooter can detect and fix hardware-related problems and drivers. If the SD card contains the same problem, Windows Troubleshooter will:

Step 1. Connect the SD card to your PC.

Step 2. Go to Windows Settings> Update and Security> Troubleshooting.

Step 3. Under the Hardware and Devices section, click “Run the troubleshooter”.

Launch Windows Troubleshooter to repair a damaged SD card

Wait for the problem to be resolved, and then restart the PC. An unidentified SD card or unreadable error will be resolved.

Method 6. Reinstall SD Card Driver and Make SD Card Visible

Applies to: Fix an SD card that is missing or unknown error due to an expired drive.

If the SD card is not recognized by Windows at all, you cannot see it in Windows Explorer or Windows Disk Management. The most likely reason is that the SD card driver has expired.

You can try to reinstall the driver to reappear in Windows Device Manager:

Step 1. Press the Windows + X keys and click “Device Manager”.

Step 2. Expand Disk Drive, right-click on the name of your SD card, and then click “Extract”.

Update sd card driver to fix corruption

Step 3. Click “OK”. Restart your computer.

Step 4. Disconnect and reconnect the SD card to your computer.

After this, Windows will automatically install the latest driver and make the SD card visible again.

Method 7. Run DiskPart Attributes Disk Clear Read-Only Command to Unlock SD Card

Applies to: SD card formatting is locked, read-only, or is a write-protected problem.

In some cases, your SD card may be locked, or read-only, by encryption/encryption with third-party encryption software.

The quickest way out is to use the DiskPart read-only instruction. Here are the steps:

Step 1. Connect the SD card to your PC. Press Windows + X, then click “Command Prompt (Admin)”.

Step 2. Type diskpart and hit Enter in the command prompt window.

Step 3. Type the following command lines and hit Enter each time:

disk list

select disk 1

disk attributes are clear read-only

erase read-only to repair damaged SD card

Replace the disk number of your SD card.

Step 4. Type exit to close the DiskPart window when the process is complete.

After this, you should be able to unlock your SD card and access the saved files again.

Adjust 8. Format SD card into FAT32 or exFAT

Applies to: Reset SD card file system to FAT32 or exFAT, fix raw SD card.

If the card displays as RAW in Windows Disk Management, or your SD card file system is not supported by Windows computers or camera devices, you need to change the SD card file system to support it.

Formatting an SD card in NTFS, FAT32, or exFAT would be the best way to get out. This method also works to restore the full capacity of the SD card if the SD card shows only half or half capacity.

You can use File Explorer to format the SD card as shown below or use the SD card format for assistance:

Step 1. Connect the SD card to the PC, open File Explorer.

Step 2. Right-click on the damaged SD card, and select “Format”.

Step 3. Select the appropriate file format between NTFS, FAT32, or exFAT.

Tick ”Quick Format” and click “Start”.